Siemens Rapidlab 1200 Скачать руководство пользователя страница 2 | Manualshive

Страница: 2 / 448

Siemens Rapidlab 1200 Скачать руководство пользователя страница 2

© 2010 Siemens Healthcare Diagnostics Inc. All rights reserved.

No part of this manual or the products it describes may be reproduced by any means or in any form without
prior consent in writing from Siemens Healthcare Diagnostics.

The Rapidlab 1200 systems are for

in vitro

diagnostic use.

AutomaticQC, Rapidlab, Rapidlink, Rapidcomm, RapidQC, Quick, CompleNet, RapidSystems, and
Multicap are trademarks of Siemens Healthcare Diagnostics.

Windows is a trademark of Microsoft Corporation.

IBM is a trademark of International Business Machines Corporation.

Origin: UK

The information in this operator’s guide was correct at the time of printing. However, Siemens continues to
improve products and reserves the right to change specifications, equipment, and maintenance procedures at
any time without notice.

If the system is used in a manner differently than specified by Siemens, the protection provided by the
equipment may be impaired. See warning and hazard statements.

«
1
2
3
4
...
»

Содержание Rapidlab 1200

































































































































































































































































































































































































































































Отзывы:

Нет отзывов