manualshive.com logo in svg

Siemens Rapidlab 1200, Руководство оператора, Страница: 333 / 448

Поделиться
Скачать
Siemens Rapidlab 1200 Скачать руководство пользователя страница 333

Rapidlab 1200 Operator’s Guide: System Configuration

8-39

02087462 Rev. V

Selecting Demographics Editing

The edit demographics option allows you to edit patient and sample demographics 
for patient samples that are already saved. When you use this option, you can edit 
demographics for individual patient samples when you recall the sample results.

If you edit a patient’s demographics and then print the patient sample report, a 
message on the report indicates that the data was edited. If your system is 
connected to a Rapidlink or Rapidcomm data management system, or an LIS, the 
Rapidlab 1200 system also sends the edited sample data to the computer system.

1. At the Setup screen, select 

Secured Options > Analysis Options

.

2. Select 

Edit Demographics 

and then select 

Save

.

Displaying Question Result

Use this option to show results that are flagged as question results. Calibration 
verification material sometimes produces results that are displayed as question 
results (-----?). 

When you turn on this option, the system shows these results, for tHb and the 
fractions, with a question mark (?) instead of displaying no results (-----?).

CAUTION: 

Do not perform analysis during proficiency testing. When this option 

is turned on, results for patient samples are not reliable. Turn the option off when 
testing is completed.

Use the Display Question Results option with Rapidlab 1245 and 1265 systems to 
display the results for tHb and fractions when performing proficiency testing. 

To set up Display Question Result, perform the following steps:

1. At the Setup screen, select 

Secured Options > Analysis Options

.

2. Select 

Display Question Result 

and then select 

Save

.

3. Select 

Return

.

4. Perform proficiency testing.

5. After proficiency testing, repeat Steps 1 and 2 to turn the Display Question 

Results option off.

Содержание Rapidlab 1200

































































































































































































































































































































































































































































Отзывы:

Нет отзывов