Siemens Rapidlab 1200 Скачать руководство пользователя страница 205

Страница: 205 / 448

Rapidlab 1200 Operator’s Guide: Maintenance

5-63

02087462 Rev. V

Viewing Maintenance Task Details

The following information is available on the Details screen:
•

Description

•

Next Due

•

Last Performed
This area is blank if the selected task is “As required.”

•

Frequency

To view maintenance task details, perform the following steps.

1. Select

Status > Maintenance > Schedule

2. Select the maintenance task you want to view.

3. Select

Details

Change System Time for Daylight Saving Time

NOTE:

Setting the date on the system clock back (as for daylight saving time)

eliminates all maintenance completions performed within that hour.

For instructions on setting system time, refer to

Setting up the Date and Time

‚

page 8-20.

Содержание Rapidlab 1200

































































































































































































































































































































































































































































Результаты поиска

Содержание Rapidlab 1200

Отзывы:

Siemens Rapidlab 1200, Руководство оператора, Страница: 205 / 448

Результаты поиска

Содержание Rapidlab 1200

Отзывы: