Siemens Rapidlab 1200 Скачать руководство пользователя страница 185

Страница: 185 / 448

Rapidlab 1200 Operator’s Guide: Maintenance

5-43

02087462 Rev. V

Replacing the CO-ox Lamp

You need a CO-ox lamp for this task.

1. Ensure that the system is not performing any analysis.

2. Shutdown the system:

a. Select

Status > Shutdown > Yes

b. When prompted, turn the power switch off.

The power switch is on the back panel of the system.

3. Move the system so that you are able to work directly behind the system.

4. For ease of access, prop the back of the system up by about 3/4 inch (1.9 cm).

When you prop up the back of the system, the back cover can lay flat when
you open it.

WARNING:

Do not touch the lamp until it has been off for at least 5 minutes.

Waiting for at least 5 minutes allows sufficient time for the lamp to cool.

CAUTION:

Do not remove power from the system for more than 6 hours if

cartridges are installed. Cartridges installed in the system remain stable for 6
hours without power.

WARNING:

To prevent damage to the hard drive and permanent loss of data, use

this procedure to shut down the system.

Содержание Rapidlab 1200

































































































































































































































































































































































































































































Результаты поиска

Содержание Rapidlab 1200

Отзывы:

Siemens Rapidlab 1200, Руководство оператора, Страница: 185 / 448

Результаты поиска

Содержание Rapidlab 1200

Отзывы: