Siemens Rapidlab 1200, Руководство оператора, Страница: 313 / 448

Rapidlab 1200 Operator’s Guide: System Configuration 8-19
02087462 Rev. V
Setting up Values
Use this screen to enter the default values for the O
2
Binding Factor (OBF) and
c tO
2
(a- ):
1. At the Setup screen, select
Parameters > Values
.
The screen shows the current values.
2. Select the demographic you want to change.
3. Enter a value and then select
Save
.
4. Select
Save
.
Setting up System Options
When you select System Options at the Setup Window, the following options are
available:
•
Country Options
• Date and Time
• Sound
• Other
Setting up Country Options
The Country Options screen allows you to perform the following tasks:
•
Select a language for the system screens and videos
• Select a date format for your laboratory
O
2
c tO
2
(a- ), t
* If c tHb is not available as an entered value and tHb is not available, the system uses 15 g/dL as a
default value.
† The system uses a default value for these parameters.
‡ A calculated value determined from the total hemoglobin value.
Parameter Required Parameters and Sample Demographics