Siemens Rapidlab 1200 Скачать руководство пользователя страница 317 | Manualshive

Страница: 317 / 448

Siemens Rapidlab 1200 Скачать руководство пользователя страница 317

Rapidlab 1200 Operator’s Guide: System Configuration

8-23

02087462 Rev. V

7. If you select a Calibration Report, select either

Status

or

Full

.

Refer to

Generating Calibration Reports

8. If you are selecting a Sample or QC report, select

Ranges

to include ranges

on the report.
The default for including ranges is off.

9. If you want to print the report to the other printer, select it and make the

selections you want for the report on that printer.

10. Select another report, as needed.

When you select another report, the system displays the options for that
report. You must repeat the above procedure to set up printing for each report
that you want to print.

11. When you are done selecting reports, select

Save

.

Setting up Barcode Options

Use this screen to turn the barcode scanner on or off, and to specify the symbology
and format for patient ID, accession number, and password barcodes.

This screen can also be used to select the barcode only option for Patient ID data
entry. Refer to

Selecting the Barcode Only Option for Patient ID Entry

The patient ID can be up to 20 alphanumeric characters in length. The
accession number and password barcodes can be up to 13 alphanumeric
characters in length.

•

Within each barcode, you can turn any characters off that you do not want the
system to include as part of the patient ID or the accession number.

•

The system automatically turns off any non alphanumeric characters, such as
hyphens, that are displayed in the barcode.

•

You can specify 1 or 2 fixed lengths for Interleaved 2 of 5 barcodes.

NOTE:

If the barcode scanner was not connected during installation of the

system, connect the barcode scanner to the system. Refer to

Connecting the

Barcode Scanner

‚ page 8-26, before completing this procedure.

1. At the Setup screen, select

Printer and Devices > Bar Code Setup

.

NOTE:

If you have selected the Required QC analysis option, you must leave

the barcode scanner on.

2. You can select

barcode

to turn the barcode scanner on or off.

«
...
315
316
317
318
319
...
»

Содержание Rapidlab 1200

































































































































































































































































































































































































































































Отзывы:

Нет отзывов