Siemens Rapidlab 1200 Скачать руководство пользователя страница 227

Страница: 227 / 448

Rapidlab 1200 Operator’s Guide: Troubleshooting

6-21

02087462 Rev. V

b. Reinsert the reagent manifold tubing (item 2, Figure 6-7) into the fitting

(item 1, Figure 6-7) that connects to the CO-ox pump tubing
(Rapidlab 1245 and 1265 systems).

c. Reinsert the waste tubing into the port on the top, right-side of the reagent

manifold (item 4, Figure 6-7).
If an obstruction has been cleared, go to step 9.

If an obstruction has not been cleared, go to

Clearing the Clot from

the Reagent Cartridge

‚ page 6-22

9. Reinstall the

sensor.

a. Push the black spring enclosure assembly to the right, until the

mechanism clicks in place.

b. Remove the syringe.
c. Remove the clot clearing tool, by lifting the clot clearing tool lip up at the

bottom while pressing the top of the tool inward.

d. Reinstall the

sensor.

e. Press the black spring enclosure assembly lever to reapply pressure to the

sensor assembly.

10. Close the system.

a. Reinstall the reagent and wash cartridges.
b. Close the reagent and wash module doors.
c. Close the front cover of the system.

11. Select the Return button twice to exit Diagnostics mode.

You are prompted to calibrate the system.

12. Select

Yes

to calibrate the system.

The clot clearing procedure is complete.

Содержание Rapidlab 1200

































































































































































































































































































































































































































































Результаты поиска

Содержание Rapidlab 1200

Отзывы:

Siemens Rapidlab 1200, Руководство оператора, Страница: 227 / 448

Результаты поиска

Содержание Rapidlab 1200

Отзывы: