Configuring the MK8000
47
Building Technologies
048_DMS_MK8000_ICC_MP4.30_A6V10062407_a_en
Fire Safety & Security Products
06.2010
CONFIGURING MK8000
The following steps outline what you need to do to configure MK8000:
Set up the Composer project
Create a new project
DMS-CG
Define the general structure of the project tree, taking into account the goal of
presenting a structure to the final user that is clear and familiar to him/her (Net-
work – Subsystems)
DMS-CG
Create the MK8000 project and system architecture
p. 48
Configure the communication network
DMS-CG
Add and configure the subsystems, following the planned structure in the
SPECS
DMS-CG
Link the subsystems to the communication network
DMS-CG
Add the required Communication Drivers
p. 50
Connect the MK8000 with the network and FEP stations
p. 53
Adjust network settings (baud rate, ports, etc)
p. 58
Set vitality (mandatory if connecting CS11 without MK7022)
p. 59
Set OPC group names (subsystems)
p. 60
Set up the Multi-state value data format
p. 60
Set up the diagnostic log
p. 62
Transfer the Configuration to the MK8000
p. 63
Test the configuration
p. 65
Backup your Project
DMS-CG
Generate an OPC configuration export file
p. 70
Set the MK8000 server to automatically start, if necessary
p. 91
