InterRanger DPS300
76
7ML19981BC01
P702 Filling Indicator
Enter the fill rate required to activate the LCD Material Filling indicator.
The value is in Units (P005) or % of Span (P007) per minute is automatically set to
10% of the Max Fill Rate (P700).
Values:
-999 to 9999
P703 Emptying Indicator
Enter the empty rate required to activate the LCD Material Emptying indicator.
The value is in Units (P005) or % of Span (P007) per minute is automatically set to
10% of the Max Empty Rate (P701).
Values:
-999 to 9999
P704 Rate Filter
Use this feature to avoid Rate Value (P707) fluctuations due to an unstable sludge
surface.
If the sludge surface rises and falls quickly, the filling or emptying indicator may
toggle unnecessarily, and may cause relay chatter if relays are controlled by rate.
This feature can be used to average those changes.
This value automatically alters the Rate Update Time (P705) and / or Rate Update
Distance (P706). Alternatively, these parameter values may be altered
independently.
Enter the time period/distance the Rate Value is averaged before display update.
Values:
0 = rate display not required
1 = continuously averaged and updated
2 = 1 minute or 50 mm (2 in)
3 = 5 minutes or 100 mm (3.9 in)
4 = 10 minutes or 300 mm (11.8 in)
5 = 10 minutes or 1000 mm (39.4 in)
P705 Rate Update Time
Enter the time period (in seconds) over which the material level rate of change is
averaged before Rate Value update.
Values:
0.000 to 9999
P706 Rate Update Distance
Enter the sludge level change (in meters) to initiate a Rate Value update.
Values:
0.000 to 9999