Siemens interranger DPS300, Инструкция пользователя, Страница: 62 / 111

InterRanger DPS300
62
7ML19981BC01
SETPOINTS * ACTION RELAY
FUNCTION
A B Status Alarm Relay
WHEN
On On de-energizes Level rises to 85% Level H or HH 85% 70%
Off Off energizes Level falls to 70%
On On de-energizes Level falls to 15% Level L or LL 15% 30%
Off Off energizes Level rises to 30%
On On de-energizes Level falls to 78%
Off Off energizes Level rises to 82%
On On de-energizes Level rises to 52%
In bounds
! 80% 50%
Off Off energizes Level falls to 48%
Off Off energizes Level falls to 78%
On On de-energizes Level rises to 82%
Off Off energizes Level rises to 52%
Out of bounds
!
80% 50%
On On de-energizes Level falls to 48%
Off Off de-energizes Fill rate increases to 10%/min +10% +5%
On On energizes Fill rate decreases to 5%/min
Off Off de-energizes Empty rate increases to 10%/min
Rate of change
-10% -5%
On On energizes Empty rate decreases to 5%/min
On On de-energizes
Temperature rises to 60
°
C
60 55
Off Off energizes Temperature falls to 55
°
C
On On de-energizes
Temperature falls to -30
°
C
Temperature
-30 -25
Off Off energizes Temperature rises to -25
°
C
On On energizes Start pump down on level at 80% 80% 20%
Off Off de-energizes Stop pump down on level at 20%
On On energizes Start pump up on level at 20%
Pump
20% 80%
Off Off de-energizes Stop pump up on level at 80%
* Values shown are for illustration purposes only. Enter values which apply to your particular installation.
! 2% factory set deadband, adjustable via P116
P112 Relay A Setpoint
Enter the critical point for the desired action to occur (based on the Relay Function
selected).
Values:
-999 to 9999
Note:
Relay A/B Setpoint values cannot be exactly equal.
P113 Relay B Setpoint
Enter the critical point for the desired action to occur (based on the Relay Function
selected).
Values:
-999 to 9999
P114 Relay “duration” Setpoint
The length of time in minutes the relay is to be energized.