Siemens interranger DPS300 Скачать руководство пользователя страница 59

Страница: 59 / 111

7ML19981BC01

InterRanger

DPS300

Independently altered Standard Alarms (P101 to P104), Relay Allocation (P110),
Relay Function (P111) and Relay A/B Setpoints (P112/P113) are automatically
reset when a Relay Set Up value is altered.

Values:

1 = Set Up 1
2 = Set Up 2
3 = Set Up 3
4 = Set Up 4

Standard Alarms (P101 to P104)

In the RUN mode, when the sludge level...

•

rises to a High or High High Alarm value, the associated Alarm and Relay Status

indicators are displayed and the allocated relay(s) de-energize.

•

falls 5% of Span (P007) below the High or High High Alarm value, the associated

Alarm and Relay Status indicators extinguish, and the allocated relay(s) energize.

•

falls below the Low or Low Low Alarm value, the associated Alarm and Relay

Status indicators are displayed and the allocated relay(s) de-energize.

•

rises 5% of Span (P007) above the Low and Low Low Alarm value, the associated

Alarm and Relay Status indicators extinguish, and the allocated relay(s) energize.

Note:

Enter all Standard Alarm material level values in Units (P005) or percent of Span
(P007) as referenced to Empty (P006).

To display the current value (or enter a new value) in percent of Span, press

as required to display the % symbol.

P101 High Alarm

Enter the High Alarm sludge level for the Point Number displayed.

Values:

-999 to 9999 (preset to 80.00% of Span or equivalent Units)

P102 Low Alarm

Enter the Low Alarm sludge level for the Point Number displayed.

Values:

-999 to 9999 (preset to 20.00% of Span or equivalent Units)

P103 High High Alarm

Enter the High High Alarm sludge level for the Point Number displayed, (Relay Set
Up 2 or 4 only).

Values:

-999 to 9999 (preset to 90.00% of Span or equivalent Units)

Содержание interranger DPS300
















































































































Результаты поиска

Содержание interranger DPS300

Отзывы:

Siemens interranger DPS300, Инструкция пользователя, Страница: 59 / 111

Результаты поиска

Содержание interranger DPS300

Отзывы: