- 29 -
Group
PV Display
Contents
Engineering setting
group
Selects the following setting groups:
Input parameter, Output parameter, Event output
parameter, SV limit, Transmission output parameter,
Communication parameter, Other parameters
Input parameter
setting group
Sets the following items:
Input type, Scaling high limit, Scaling low limit, Decimal
point place, Sensor correction, PV filter time constant
Output parameter
setting group
Sets the following items:
OUT1 proportional cycle, OUT1 ON/OFF hysteresis,
OUT2 proportional cycle (when DR, DS or DA option is
ordered), OUT2 cooling method (when DR, DS or DA
option is ordered), Direct/Reverse action, etc.
Event output
parameter setting
group
Sets the following items:
Event output EV1 allocation,
Event output EV2 allocation,
Event output EV3 allocation,
Event output EV4 allocation
SV limit setting group
Sets the following items:
SV high limit, SV low limit.
Transmission output
parameter setting
group (When TA or TV
option is ordered)
Sets the following items:
Transmission output type, Transmission output high
limit, Transmission output low limit
Communication
parameter setting
group (When C or C5
option is ordered)
Sets the following items:
Communication protocol, Instrument number,
Communication speed, Response delay time, etc.
Other parameters
setting group
Sets the following items:
Set value lock, Program start Auto/Manual,
Program control start type, Power restore action, etc.
Auto/Manual control
switch group
Sets the following item:
Auto/Manual control switch.
Содержание PCA1
Страница 1: ...PROGRAMMABLE CONTROLLER PCA1 INSTRUCTION MANUAL ...
Страница 9: ... 9 2 Name and Functions of Controller Fig 2 1 ...
Страница 179: ... 179 ...