Shindaiwa DGK20FS, Руководство владельца и оператора

Страница: 43 / 52

40
(9) Flushing Liquid in Spill Containment
Set a container to catch spilled liquid from the flushing port of the drain faucet on the front
of this generator.
Remove the drain plug (R1/2”) and open the drain faucet lever.
< Note >
 When removing or attaching the plug, hold the drain faucet fixed using an open and wrench or similar
tool and turn the plug.
 If oil or other liquid mixed in with the flushed liquid, this could be oil leakage etc. In such case, check
for the leaked location.
 The types of liquids that can accumulate in the spill containment include oil, fuel, coolant water and
battery fluid such that it is not possible to distinguish between rain water and other liquids. Dispose of
flushed liquids according to the related laws and regulations.
Close the drain faucet lever after the liquid has been flushed, and apply sealant coating to
the plug or wrap it in thread seal tape.
(10) Spill Containment Cleaning/Inspection
WARNING : INJURY

Do not attempt to lift the equipment with any additional weight such as optional
fuel tanks or trailers.
 No persons should ever be under a lifted generator at all time.
CAUTION : INJURY

Always be sure to use lifting hooks when lifting up the generator, and raise it
slowly at a completely vertical angle.

Personnel performing lifting work must wear protective gear such as helmets,
safety shoes and gloves.

Do not move the generator during operation.
Clean Every 500 hours
Separate the spill containment from this generator to clean and inspect the spill containment.
Check Daily
1
2
3
Drain Plug(R1/2”)
Loosen
Tighten
Fixing
Drain Faucet
Drain Faucet
Drain Faucet
Drain Faucet
Lever
Drain Faucet
Lever
Close
Close
Open
Open
Drain Plug(R1/2”)
Drain Plug(R1/2”)
Drain Faucet Lever
Drain Faucet Lever