Shindaiwa DGK20FS, Руководство владельца и оператора

Страница: 16 / 52

13
○ ECU Values
Status Screen
Contents
Load (%) Load factor
EngineSpeed (rpm) Engine speed
DPFReagen Not used
T-coolant (
℉
) Coolant temperature
P-Oil (psi) Oil Pressure
FuelRate (g/h) Fuel economy
T-IntManifold (
℉
) Intake temperature in the manifold
T-Intake (
℉
)
Intake temperature
DEFLevelLamp Not used
DEFLevel (%) Not used
○
ECU Values
Status Screen
Contents
Genset kWh Counter of active power
Genset kVArh Counter of reactive power
Running Hours Engine operation hours counter
Num Starts Engine start commands counter
Num E-Stops Emergency stop alarms counter
Shutdowns Shutdown alarms counter
○
Aftertreatment
Not used.
○
Plug-in Modules
It is used when installing an additional module.
○
Alarm List
It is an alarm list. If an error occurs during operation, the operation display will automatically switch
to the alarm screen. Resolve the reason and press the FAULT RESET button to clear the alarm.
5-2. Spill Containment
WARNING : INJURY
 Do not open the check door when the power switch is in the ON position. It will cause
injury by rotating parts such as cooling fans and fan belt.

Always turn the power switch to the OFF
position and stop the engine, then close
and lock OPERATION PANEL DOOR before checking or maintaining the engine or
any equipment.
CAUTION : BURNS
 Do not touch the engine and surrounding components immediately after stopping the
engine as they are still extremely hot.
CAUTION : FIRE
 If fuel or oil is leaking, repair the leaking location before operation.