Shindaiwa DGK20FS, Руководство владельца и оператора

Страница: 15 / 52

12
 Breaker status
Not used.
 RH
Running hours.
 RPM
Engine speed.
 Current process timer
Process content and remaining execution time.

Measurement Screens
○
Generator
Status Screen
Contents
L1N (V)
U-N voltage
L2N (V) W-N voltage
L1L2 (V) U-W voltage
Generator Freq (Hz) Frequency
○
Generator Current
Status Screen
Contents
L1 (A)
U phase current
L2 (A) W phase current
○
Analog Inputs
Status Screen
Contents
Fuel Level (gal)
Fuel amount
BatteryVoltage (V) Battery voltage
○
Binary Inputs
Status Screen
Contents
1 Remote Start/Stop
Remote start terminal is closed and the value is
“1”
2 Terminal Cover Open The value is “1” while the terminal cover is open
3 Spill Containment Fluid
Level Check
If the spill containment is filled with liquid, the value is “1”
4 Air Filter Clogging Up If the Air Filter is clogged, the value is “1”
○
Binary Outputs
Status Screen
Contents
1 BREAKER SHT During BREAKER shunt, the value is “1”
2 ACC During ACC output, the value is “1”
3 Starter During cranking, the value is “1”
4 ECM Power During ECM Power output, the value is “1”
7 OverSpeed During OveerSpeed, the value is “1”
○
Generator Power
Status Screen
Contents
L1 (kW), (PF), (kVA)
U-phase active power, power factor, apparent power
L2 (kW), (PF), (kVA) U-phase active power, power factor, apparent power
Σ
(kW), (PF), (kVA) Total active power, power factor, apparent power