Shindaiwa DGK20FS, Руководство владельца и оператора

Страница: 20 / 52

17

If installing this generator, set up barriers or fencing completely around the boundary line of
the construction area and take measures to prevent persons not involved in the
construction from entering the area.

Position this generator on a hard, flat and leveled surface.

Position this generator 3 ft. (1 m) or more from walls or other hindrances so that the operation
panel door and Left/Right check doors are accessible for internal inspection/maintenance.
< Note >
 This generator is manufactured presupposing that it will be installed on a flat, hard and
leveled surface. Accordingly, care must be taken as using under any other installation
conditions can result in a fault or malfunction.
 Do not place any objects where they will interfere with the radiator or muffler exhaust ports.
Objects interfering with these ports will result in reduced engine output, overheating, and
electrical component fault/malfunction.
 Operating the equipment in dusty or excessively salty location can result in a clogged
radiator or overheating resulting in malfunction/fault or reduced insulation of electrical
components. Be sure to thoroughly inspect and perform maintenance if using in such
locations.
7-1. Load Cable Selection
Select cable for use that has sufficient thickness and an allowable current for use, and
distance from the generator to the equipment using the generator.
< Note >

Select cable with a thickness that ensures that the voltage drop across the cable will be
within 5% of the rated voltage.
CAUTION : FIRE

Do not
carry flammable items (such as fuel, gas and paint) or items that are highly
combustible near the generator as the muffler, exhaust gas and other parts become
extremely hot.

Position
this generator 3 ft. (1 m) or more from walls or other hindrances, and on a
level surface.

Remove the wood ties if using
anchors to secure the generator.

Do not connect the generator output to indoor wiring.
CAUTION : PROPERTY DAMAGE
 Cable burnout could occur due to generated heat if the load current exceeds the
allowable current of the cable.
 The voltage drop between cables is large if the cable is excessively long or thin,
resulting in decreased input voltage to equipment using the generator, thereby
causing decreased performance, faulty operation and malfunction.
7. Load Connections