Shindaiwa DGK20FS, Руководство владельца и оператора

Страница: 17 / 52

14
The bed of this generator is equipped with the spill containment (structure for preventing
leakage of liquid) so that any spilled liquid will not leak to outside of the generator when oil or
fuel is spilled or leak. Before starting operation, check if there is accumulated liquid in the spill
containment. Flush out any liquid that has accumulated.
(Refer to section “
8-5. Checking the Spill Containment ” for inspection procedures. )
(Refer to section “ 10. Inspection/Maintenance (9) Flushing Liquid in Spill Containment ”
for flushing procedures.)
The generator is equipped with the following in order to prevent liquid from spilling in case you
forget to flush the liquid: The operation panel is equipped with the SPILL CONTAINMENT
CHECKING indicator that illuminates when its sensor is triggered as the spill containment
capacity accumulated enough liquid to reach to about 8 gal (30.3 liters).
(Refer to section “
10. Inspection/Maintenance (9) Flushing Liquid in Spill Containment ”.)
< Note >
 Water can also accumulate in the spill containment due to rain entering into the generator.
Accordingly, you should periodically flush liquid accumulated within the generator. However,
you should flush water according to the frequency/amount of rainfall.
 The types of liquids that can accumulate in the spill containment include oil, fuel, coolant,
battery fluid and DEF such that are mixed with rainwater and other spills. Dispose of flushed
liquids according to the applicable laws and regulations.
5-3. Switches
Switches
(1) Power Switch
This is the main power switch of the generator.
When the power switch turned to OFF position, the engine is stopped.
< Note >
 Do not leave the generator in this ON position with the engine stopped.
Doing so will cause the battery to drain.
Voltage
Regulator
Power Switch
Circuit
Breaker