Shindaiwa DGK20FS, Руководство владельца и оператора

Страница: 13 / 52

10
5-1. Controller
This generator has a Controller which is used for starting or stopping the power generator or
the engine, for monitoring. If you turn the Power Switch ON position, the status screen
appears.(Refer to section
“5-1.Controller (2)Operation Display” .)
(1)
Front panel elements
①
STOP button
Works in MAN mode only. Press this button to initiate the stop sequence of the gen-set.
②
START button
Works in MAN mode only. Press this button to initiate the start sequence of the engine.
③
LEFT button
Use this button to move left or to change the mode. The button can change the mode only
if the main screen with the indicator of currently selected mode is displayed.
④
RIGHT button
Use this button to move right or to change the mode. The button can change the mode
only if the main screen with the indicator of currently selected mode is displayed.
⑤
HORN RESET button
Use this button deactivate the horn output without acknowledging the alarms.
⑥ FAULT RESET button
Use this button to acknowledge alarms and deactivate the horn output. Inactive alarm will
disappear immediately and status of active alarms will be changed to “confirmed so they
will disappear as soon as their reasons dismiss.
5. Equipment
15
1
2
3 4
5 6
7
8
9 10
11
12 13 14