Shenzhen Mindray Bio-Medical Electronics Co., Ltd. DC-N2, Руководство оператора

Страница: 97 / 221

Image Optimization 5-31
NOTE: To define a ROI, please try to cut the useless data as to reduce the volume data,
shortening the time for image storing, processing and rendering.
5. Select [Render] mode, [Method] (including the distance or angle to be scanned) if
necessary.
6. Press <Update> on the control panel to begin the 3D image acquisition..
The system enters into 3D image viewing status when the acquisition is completed; or,
you can finish the acquisition ahead by pressing <Freeze> or <Update> on the control
panel.
In image viewing status, you can perform operations like VOI setting, image editing, for
details, please refer to “5.10.5 Smart 3D Image Viewing”.
7. Exit Smart 3D.
Press <Update> or <Freeze> to return to acquisition preparation; or, press <B> or Smart
3D user-defined key to exit Smart 3D.
5.10.4 Smart 3D Acquisition Preparation
Select a parameter package, set parameters like [Method] (including the scanning distance
and angle).
„
Method
You can capture images through Linear scan or Fan scan.
z
Linear scanning
Move the probe across the surface. See the following figure.