Shenzhen Mindray Bio-Medical Electronics Co., Ltd. DC-N2 Скачать руководство пользователя страница 16

Страница: 16 / 221

1-2 Safety Precautions

1.2

Meaning of Signal Words

In this manual, the signal words"

DANGER

”, “

WARNING

”, “

CAUTION

”,

“

NOTE

” and "Tips" are used regarding safety and other important instructions. The signal

words and their meanings are defined as follows. Please understand their meanings clearly
before reading this manual.

Signal word

Meaning

DANGER

Indicates an imminently hazardous situation that, if not avoided, will result
in death or serious injury.

WARNING

Indicates a potentially hazardous situation that, if not avoided, could result
in death or serious injury.

CAUTION

Indicates a potentially hazardous situation that, if not avoided, may result
in minor or moderate injury.

NOTE

Indicates a potentially hazardous situation that, if not avoided, may result in
property damage.

Tips

Important information that helps you to operate the system more effectively.

1.3

Meaning of Safety Symbols

Symbol

Description

Type-BF applied part.

The ultrasound probes connected to this system are type-BF applied parts.

General warning, caution, risk of danger.

Patient/user infection due to contaminated equipment. Be careful when
performing the cleaning, disinfection and sterilization.

Patient injury or tissue damage from ultrasound radiation. It is required to
practice ALARA when operating ultrasound system.

Содержание DC-N2






























































































































































































































Результаты поиска

Содержание DC-N2

Отзывы:

Бренды по названию

Популярные бренды

Shenzhen Mindray Bio-Medical Electronics Co., Ltd. DC-N2, Руководство оператора

Результаты поиска

Содержание DC-N2

Отзывы:

Бренды по названию

Популярные бренды