Shenzhen Mindray Bio-Medical Electronics Co., Ltd. DC-N2, Руководство оператора

Страница: 46 / 221

3-8 System Preparation
NOTE:
Before inserting the connector into the probe port, inspect the connector pin. If the
pin is bent, don’t use the probe until it has been inspected/repaired or replaced.
3.5.2 Disconnecting a Probe
1. Turn the lock handle 90°counterclockwise to the horizontal position (Shown in the left
figure).
2. Pull the probe connector evenly from the socket (Shown in the right figure).
3.6 Connecting the Footswitch
Connect the footswitch to the main unit via a USB port.
Set the functions of the footswitch in the [Key Config] page. Refer to "11.1.6 Key Config" for
details.
3.7 Connecting/ Removing a USB Storage
Device
WARNING:
DO NOT detach an USB storage device directly; otherwise,
the ultrasound system or the USB device and/ or data stored
in the device may be damaged.
„
When connecting a USB storage device to the ultrasound system, you can see the
symbol in the lower right corner of the screen.
„
To remove the USB storage device: Click to open the [Remove USB Device] screen.
Select the device to be removed. Click [OK].
Open
Lock