Servomex SERVOTOUGH Oxy, Руководство оператора

Страница: 90 / 145

78
© Servomex Group Limited. 2020 01910001B_8
7.2
Pressure compensation (option)
7.2.1
Introduction
When pressure compensa�on is on:
• A Pressure Compensa�on indicator is displayed on the Measurement screen (see Figure
6
).
•
The sample measurements shown on the Measurement screen (and provided as
outputs) are pressure compensated
measurements.
• If required, you can view the pressure compensated and uncompensated sample
measurements at any �me: refer to Sec�on 7.2.3.
7.2.2
Switching pressure compensation on/off
To switch pressure compensa�on on/off, use the following procedure:
1.
Select:
Set Up Pressure
2.
The Pressure compensa�on select screen shows the current selec�on state:
• "Yes" indicates that pressure compensa�on is on.
• "No" indicates
that pressure
compensa�on is off.
Figure
90 -
The Pressure compensa�on
7.2.3
Viewing pressure effected measurements
When
pressure compensa�on is on, use the following procedure to view simultaneous pressure
compensated and uncompensated measurements:
1.
Select:
View Pressure
2. On this
screen:
•
The "Pre comp" value is the sample measurement before pressure compensa�on.
• The "Post comp" value is the pressure compensated sample
measurement.