Servomex SERVOTOUGH Oxy, Руководство оператора

Страница: 52 / 145

40
© Servomex Group Limited. 2020 01910001B_8
Figure
7
shows the op�ons/screens which can be password
-
protected within the menu structure.
5.9
Setting the security level
Note:
As supplied, the security level is set to ‘high’, the supervisor password is set to "2000"
and the operator password is set to "1000".
Before the analyser is used for sample measurement, we recommend that you select the security level
most suitable for the way in which the analyser will be used by you and/or your personnel.
Use the following procedure to select the required security level:
1.
Select Se�ngs Security.
2.
To change the security level, press the so� key. You will then be prompted to enter
the supervisor password.
3.
Once the supervisor password has been entered correctly, the Security select screen will
be displayed (see Figure 15), with the currently selected security level highlighted.
4.
To
change the security level, use the
and
so� keys to highlight the required
level, then press the so� key. The Security level screen will then be displayed
again, showing the newly selected security level.
Figure
15 -
The Security level screen
Figure
16 -
The Security select screen
5.10
Changing passwords
Note:
If you change a password, ensure that you record the new password somewhere safe.
Otherwise, if you cannot recall the new password, you will have to contact Servomex
or your local Servomex agent for assistance.
Use the following procedure to change the s
upervisor and operator passwords:
1.
Select: Se�ngs
Password.
2.
To change the supervisor password, press the so� key, then enter the new
password.