Servomex SERVOTOUGH Oxy, Руководство оператора

Страница: 29 / 145

01910001B_8 © Servomex Group Limited. 2020
17
3.
UNPACK THE ANALYSER
The
analyser is heavy (see Sec�on 2.1). Care must be taken when handling, see
Sec�on
5.1
for Mechanical Installa�on guidance.
1. Remove the
analyser and any other equipment from its packaging.
2.
Inspect the analyser and the other items supplied, and check that they are not
damaged. If any item is damaged, immediately contact Servomex or your local
Servomex agent.
3.
Check that you have received all of the items that you ordered. If any item is missing,
immediately contact Servomex or your local Servomex agent.
4. Check that you have also received an accessory kit, containing the following:
Quan�ty
Item
Check (3)
1
2 mm hexagonal key
o
1
5 mm hexagonal key
o
2
Spare fuses
o
If the accessory kit is missing, or any item is missing from the kit, immediately contact Servomex
or your local Servomex agent.
Check that the electrical supply voltage (shown on the ra�ng label) is correct for your
electrical supply. If the incorrect voltage is shown, do not con�nue to install the
analyser; instead, contact Servomex or your Servomex agent.
Check that the sample inlet gas flow rate (shown on the ra�ng label) is correct, if not
contact Servomex or your Servomex agent, as the measurement maybe damaged by
excessive flow rates.
Note:
Retain the shipping documentation and packaging for future use (for example, return
of the analyser
to Servomex for servicing or repair).