Servomex SERVOTOUGH Oxy, Руководство оператора

Страница: 54 / 145

42
© Servomex Group Limited. 2020 01910001B_8
5.13
Setting the clock
Note:
The time and date will remain set for approximately 1 week if the power supply to the
analyser
is switched off.
Use the following procedure to set the date and �me:
1.
Select: Se�ngs Clock
2. Edit the di
splayed �me.
Figure
20 -
The Clock (�me) screen
3.
Edit the displayed
date.
4. The date format can be set to your regional preference (‘day/ month/year’ or
‘month/day/ year’): refer to Sec�on 5.14
.
Figure
21 -
The Clock (date) screen
5.14
Changing regional settings
You can configure the following analyser regional se�ngs so that the informa�on shown on the various
screens is beter suited to your local conven�ons:
Setting Options available
Language Various languages are supported
Date format Day/Month/Year * or Month/Day/Year
Decimal format Use of "."* (full stop) or "," (comma) as the decimal point
* Default op�on.
To change the regional se�ngs:
1.
Select: Se�ngs Regional
2. This
screen
shows the
first regional op�on (Language).