Servomex SERVOTOUGH Oxy, Руководство оператора

Страница: 31 / 145

01910001B_8 © Servomex Group Limited. 2020
19
4.
ANALYSER
USER
INTERFACE
Note:
Throughout this manual, reference is made to product ordering options (such as "Auto
validation" or "pressure compensation") which must be specified at the time of
purchase. Associated menus and menu options will not be available if your
analyser
does not have the corresponding product options.
4.1
Introduction
The
analyser user interface comprises the following (shown on Figure
1
):
Display Shows various screens: see Sec�on 4.2
onwards.
So� keys
The func�on of each of the so� keys depends on
the screen currently being shown on the display:
see
Sec�on 4.3.
Alarm LED
On when an alarm condi�on exists: see Sec�on
5.20.
Fault LED On when a fault condi�on exists: see Sec�on 10
.
4.2 Start-
up and measurement screens
When you first switch on the analyser, a ’start
-
up screen’ is displayed while the
ana
lyser carries out a
self
-test.
The start-up
screen shows the Servomex name, a ‘self
-
test �me elapsed/remaining’ indicator, and
messages iden�fying the tasks being carried out as part of the self
-test.
The screen will ini�ally display the "System Check" task message. The Measurement screen is then
displayed, as shown in Figure
6
below.