Servomex SERVOTOUGH Oxy, Руководство оператора

Страница: 69 / 145

01910001B_8 © Servomex Group Limited. 2020
57
Figure
50 -
The mA output service screen
Figure
51 -
The mA output calibrate screen
3.
As soon as the mA output calibrate screen is shown, the nominal mA output value is
set
to 20 mA:
•
Use
your control/monitoring equipment (connected to the analyser) to monitor the
actual output value.
•
Use the and
so� keys to increase or decrease the actual output value
un�l your control/monitoring equipment indicates 20 mA output.
4. When the mA output has been correctly calibrated,
press the
so� key: the mA
output service screen (Figure 50) will then be displayed again.
Note:
The actual mA output value is controlled from the mA output calibrate screen as long
as the screen is displayed. As soon as the mA service screen is no longer displayed, the
mA output value will be updated to reflect the corresponding gas measurement.
5.17
Configuring and using the relay outputs
5.17.1
Overview relay default status settings
As
default the relays are set up as in the following table. For details on relay connec�ons refer to Sec�on
5.3.3.