Schindelhauer Bikes Arthur, Руководство пользователя

Страница: 57 / 132

57
EN
Suggestions for an ergonomic setup of the handlebar and the controls can
be found in chapters 6 on page 68.
3
Pay attention to the correct torque of 14-15 Nm for the
bolt at the right side of the stem (bolt #2, fig. 1 )! Danger
of accident!
approx. 45°
horizontal
3.3 Pedal installation
1. Put the washers on the pedal threads (fig. 4 ).
2. Apply the supplied assembly paste to the pedal threads.
3. Bolt the pedals (6mm hex key) onto the crankarms and tighten them to
a torque of 35 Nm (fig. 5 ).
Please be aware that the right pedal has a right-hand
thread and the left pedal a left-hand thread. The left pedal
also has a machined groove for identification (fig. 4 ).
!
5
4
left pedal
groove
right pedal