Scantronic 808, Инструкция по установке и программированию

Страница: 42 / 69

40 496234
4. Programming
Use: To: Notes:
Assign zone types.
Allocate zones to Areas.
Assign zone attributes.
Menu 41 Allocate Areas to Level
keys A, B, C or D.
Set Level exit mode.
Set Level exit time.
Set Level entry time.
Set Level Alarm response.
Set Level rearm response.
Allocate Keypad
entry/exit tones to Levels.
Enable/disable keys 1 & 3
(PA).
Enable/disable keys 7 & 9
(Control).
Assign output types
Bell, Strobe, etc.
Select Reset type
Customer, Installer, Anticode or RedCare. Press C or
D to enable/disable options.
Menu 65
Return to User Mode and select User Information.
Set Bell Delay and Run
Time Menu 53
Full,Local or Internal. Press keys A or B to select
Levels, zones, or types.
Response can be Never, Once, Twice, or Three
Times.
Press A or B to change Level. Press Enter + C or D
to select rearm option.
Menu 42
Menu 43
Menu 45
Menu 46
Menu 47
Menu 51
Level Flexi-zone
Flexi zones can be FE, ER, NA or NU. Only four
Flexi-zones per Level. Press:
A or B to change Levels.
Enter to change time.
Menu 44
Press:
A or B to change Levels.
Enter + 1 to 4 to allocate Areas.
1 to 4 to de-allocate Areas.
Press:
A or B to change Levels.
C to change exit Mode.
Enter to change exit Time.
Press:
A or B to change Levels.
Press:
A or B to change Levels.
A, B, C or D to allocate Level to keypad.
A, B, C or D to de-allocate Level to keypad.
Enter to enable/disable PA (1 & 3) or control (7 & 9)
keys.
Press:
A or B to select an output.
Enter to change output type.
C or D to select output type.
Enter to change between normally on or off.
C or D select normally on or off.
If using Level set, press:
A, B, C or D to allocate Levels.
A, B, C or D to de-allocate Levels.
Menu 32
Assign zone names. Menu 31
Press:
A or B to change zone number and type.
C to assign zone to Area.
1 to 4 to select Area.
C to assign zone attribute
Press:
Number keys repeatedly to obtain letters.
C or D to move cursor.
Enter bell time in minutes.
Press Enter to change bell delay.
Enter bell delay in minutes.
Figure 22. Programming Sequence for Example 1
808 sect 4 programming.p65 9/8/98, 10:27 AM 40