Scantronic 808, Инструкция по установке и программированию

Страница: 46 / 69

44 496234
4. Programming
User Facilities
In User Mode the 808 can store unique access codes for up to eight users.
Each user can be linked to one or more Levels. There are two types of user:
• The Supervisor (User 01), who can change all other user's access
to the system.
• Ordinary users, who can cannot change their level of access to
user functions.
The Supervisor can give users 02 to 08 one or more of the following access
rights:
Enter a Duress code.
Either Full use (set and unset the Levels they are linked to) or Arm only
(set but not unset a Level).
Omit Zones.
Read the system log.
Print from the system log.
Change Zone names.
Reset Levels.
Change Time and Date.
The supervisor can give any ordinary user the access rights listed above. An
ordinary user cannot change the access rights of any other user.
Operating the System
Users can set and unset the system from a keypad by one of the following
methods:
[Access Code]+ [Enter Key]
The system sets or unsets Level A in each Partition linked to that
user.
Or
[Access Code] + [Level Key]
The system sets or unsets the Areas assigned to the Level key
used.
808 sect 4 programming.p65 9/8/98, 10:27 AM 44