53
From the LCD:
•
Press
MENU
button
•
Scroll to
SETUP
option and press
ENTER
.
•
Scroll to
STATION ON/OFF
and press
ENTER
—
OR
—you may dial
6
and
immediately enter the option.
•
Scroll to
AUTO HOLD
, press
ENTER
to change option status.
•
Press
CANCEL
to enter change and return to the Main Configuration Menu—
OR
—press
END
to return to idle screen.
NOTE: Intercom calls can be automatically put on hold by pressing
TRANSFER
.
HEADSET OPERATION
Keyset users can switch between headset mode and handset mode. When using
headset mode, press the
SEND
and
END
buttons to answer and release calls.
•
With the handset on-hook, press
TRANSFER
and then dial
110
.
•
Dial
021
to use the headset or
020
to use the handset.
•
Press
TRANSFER
to store your selection.
From the LCD:
•
Press
MENU
button.
•
Scroll to
SETUP
option and press
ENTER
.
•
Scroll to
STATION ON/OFF
and press
ENTER
—
OR
—you may dial
6
and
immediately enter the option.
•
Scroll to
HEADSET USE
and press
ENTER
to change option status.
•
Press
CANCEL
to enter change and return to Main Configuration Menu—
OR
—press
END
to return to idle screen.
Your keyset may be equipped with a Headset mode button. If it is so equipped
pressing this button while the button indicator is blank will cause the keyset to
enter headset mode and the button indicator to be lit solid to indicate this.
Pressing the button while the button indicator is lit solid will cause the keyset to
return to handset mode and the button indicator will go blank.
HOT KEYPAD
On your phone system your keyset’s keypad can be made “live” or “hot” so that it is
not necessary to lift the handset or press the
SPEAKER
button before you begin
dialing. Calls can be made and features activated by simply dialing the C.O. line
number, trunk group access code, intercom number or feature access code.
•
With the handset on-hook, press
TRANSFER
and then dial
110
.
•
Dial
031
to turn the Hot Keypad on or
030
to turn it off.
•
Press
TRANSFER
to store your selection.
SET ANSWER MODE (INTERCOM)
You can receive internal calls in one of three modes
•
While on-hook, press
TRANSFER
and then dial
103
.
•
Dial
0
for Ringing,
1
for Auto Answer or
2
for Voice Announce.
•
Press
TRANSFER
to store your selection.
From the LCD:
•
Press
MENU
button.
•
Scroll to
SETUP
option and press
ENTER
.
•
Scroll to
ANSWERING MODE
and press
ENTER
—
OR
—you may dial
1
and
immediately enter the option.
•
Select desired station ring type setting. (Ring, Auto Answer, or Voice
Announce).
•
Press
ENTER
to select and
SAVE
.
•
Press
CANCEL
to return to the Main Option Page—
OR
—press
END
to return
to idle screen.
NOTE: When your keyset is programmed for Auto Answer and you have Forward
No Answer (FNA) turned on, you must answer screened transfers by pressing the
SEND
button before your FNA timer expires or the call will forward.
SET ANSWER MODE (CO)
Your incoming CO calls can be set to follow the intercom answer mode.
•
While on-hook, press
TRANSFER
and then dial
110
.
•
Dial
15
to access
AUTO ANS CO
.
•
Press the
VOLUME UP
or
DOWN
key to change status.
•
Press
TRANSFER
to store your selection.
AUTOMATIC HOLD
While on an outside call, pressing a line button, route button or a flashing
CALL
button will automatically put your call on hold and connect you to the next call.
This feature can be turned on or off at your keyset.
•
With the handset on-hook, press
TRANSFER
and then dial
110
.
•
Dial
001
to turn Automatic Hold on or
000
to turn it off.
•
Press
TRANSFER
to store your selection.
52
Home Page
ITP-5112L
Table of Contents
Содержание OfficeServ 7200
Страница 218: ...DS 5000 Home Page Table of Contents...
Страница 264: ...Home Page iDCS Keyset Table of Contents...
Страница 279: ...N O T E S Home Page Standard Guide Table of Contents...
Страница 302: ...Home Page System Admin Table of Contents...
