Samsung OfficeServ 7200, Инструкция пользователя

Страница: 349 / 368

DISPLAY SPEED DIAL NAME
This option allows you to view the name associated with a speed dial number as
it is dialed.
• With you handset on-hook, press TRANSFER and then dial 110 .
• Press 111 to turn DISP SPDNAME on or 110 to turn it off.
• Press TRANSFER to store your selection.
CALLER ID REVIEW ALL
This feature allows display keyset users to review Caller ID information for calls
sent to their stations.This list can be from ten to fifty calls in a first in, first out basis.
The list includes calls that you answered and calls that rang your station but that
you did not answer. When reviewing this list, you can press one button to dial the
person back. The system must be using LCR to dial the stored number.
• With you handset on-hook, press TRANSFER and then dial 110 .
• Press 121 to turn CID REVIEW ALL on or 120 to turn it off.
• Press TRANSFER to store your selection.
SECURE OHVA
This option allows you to receive OHVA calls via the speaker while you are on the
handset.
• With you handset on-hook, press TRANSFER and then dial 110 .
• Press 131 to turn AUTO CAMP-ON on or 130 to turn it off.
• Press TRANSFER to store your selection.
CONFIGURE MOBILE EXTENSIONS
(MOBEX)
This feature allows you to configure options for any Mobile Extension (MOBEX)
ports that are assigned to you by your telephone system administrator. You can
turn a port on or off; set the telephone number for the port; or set the caller ID you
will be calling in from.The caller ID field has no effect unless you have been author-
ized as an Executive MOBEX user. Check with your telephone system administrator
for further details on your specific system configuration.
To set the phone number a MOBEX port can reach you on:
• Press TRANSFER and then dial 126 .
• Dial your station pass code.
• Dial the number of the port you wish to configure (1-5) (you may also use the
Volume Up and Volume Down keys to select a port and press the right soft key
to confirm).
• Dial 0 to select the telephone option.
43
Your keyset may be equipped with a Headset mode key. If it is so equipped press-
ing this key while the light is out will cause the keyset to enter headset mode and
the light will illuminate to indicate this. Pressing the key while the light is lit will
cause the keyset to return to handset mode and the light will go out.
HOT KEYPAD
Your keyset’s keypad can be made “live”or “hot”so that it is not necessary to lift the
handset or press
SPK or the MONITOR key before you begin dialing. Calls can be
made and features activated by simply dialing the C.O. line number, trunk group
access code, intercom number or feature access code. To activate this feature:
• With the handset on-hook, press TRSF and then dial 110 .
• Dial 031 to turn the Hot Keypad on or 030 to turn it off.
• Press TRSF to store your selection.
KEY CONFIRMATION TONE
You can hear a short beep (confirmation tone) each time you press a button on the
dial pad. This tone can be turned on or off.
• While on-hook, press TRSF and then dial 110 .
• Dial 040 to turn tones off or 041 to turn tones on.
• Press TRSF to store your selection.
REJOINING A PAGE
This feature allows you to hear the remaining portion of an ongoing internal page
after you return your keyset to idle. To enable this feature:
• With the handset on-hook, press TRSF and then dial 110 .
• Dial 051 to turn this feature on or 050 to turn it off.
• Press TRSF to store your selection.
RING PREFERENCE
This feature automatically answers ringing calls when you lift the handset or press
the
ANS/RLS or the MONITOR key if you are using a 7B phone. This method will
always answer calls in the order they arrived at your keyset. When you turn ring
preference off, you must press the flashing button to answer a call, allowing you to
answer calls in the order you choose.
• With the handset on-hook, press TRSF and then dial 110 .
• Dial 061 to turn ring preference on or 060 to turn it off.
• Press TRSF to store your selection.
42
Home Page DCS Guide Table of Contents