MANUAL SIGNALLING
Use this feature when you want to send a brief 500ms ring burst to another sta-
tion, regardless of the status of your phone (on-hook, off-hook, handsfree, DND, or
ringing).
To send a signal to another station:
•
Press the Manual Signalling (
MS
) button.
•
You may press the
MS
button repeatedly to send multiple signals to the des-
ignated station.
NOTE: Your phone must have a Manual Signalling (MS) button with a station
number extender assigned to it.
OFF-HOOK VOICE ANNOUNCE
Keysets may receive a voice announcement while on another call. The calling sta-
tion must have an
OHVA
button. When you are in DND, you cannot receive OHVA
calls. The OHVA feature will work with intercom and transferred calls.
When you receive an OHVA and secure OHVA is ON, you will hear the announce-
ment in the handset receiver, if you are using the handset. If secure OHVA is OFF
then you will hear the announcement on the speaker, if you are talking on the
handset. If you are using the speakerphone the announcement will always be
heard through the speaker.
To make an off-hook voice announcement:
•
Dial the extension number or press the
DSS
button.
•
When you receive a busy signal, press the
OHVA
button.
•
After the attention tone, begin speaking.
•
Finish the call by replacing the handset.
•
Press the flashing
CALL
button on your keyset. This will place the original
party on hold and allow you to talk to the announcing party.
•
To return to your first party, press the button corresponding to your original
call. This will disconnect the OHVA call.
NOTES:
1.
When you are voice announcing to a station close to you, use the handset to
avoid an echo effect.
2.
You cannot off-hook voice announce to single line telephones.
41
To enter an account code before placing the call:
•
Press your
ACC
key or dial
47
.
•
Dial the account code or bin number.
•
You will receive a confirmation tone and display.
•
When prompted dial a trunk or trunk group (i.e. 9) and the telephone number
to call.
To enter an account code by interrupting the conversation:
•
While on an outside call press the
ACC
key or press
TRANSFER
followed by
47
.
•
Dial the account number or bin number (if you are entering an account code
you will need to press your
ACC
key or right soft key to finalize the entry)
NOTE: If you make an error simply repeat the procedure with the correct code.
Only the most recent account code dialed will be recorded.
LOCKING YOUR KEYSET
You can lock your keyset to control misuse of your phone while you are away. You
can unlock it when you return. Your default station passcode is 1234.
•
While on-hook, press
TRANSFER
and then dial
100
.
•
Dial your four digit station passcode.
•
Dial
1
to locking outgoing,
2
for locked all calls, or
0
to unlock.
•
Press
TRANSFER
to store your selection.
Note*: When 911 is programmed, 911 emergency dialing is allowed for a LOCKED
OUTGOING station.
40
0
UNLOCKED
1
LOCKED OUTGOING
Hold Button LED Flashes
2
LOCKED ALL CALLS
Hold Button LED Solid
Make outside calls
YES
NO (ACCESS DENIED)
NO
Receive outside calls
YES
YES
NO
Make intercom calls
YES
YES
NO
Receive intercom calls
YES
YES
NO
Make 911 calls
YES
YES
*
NO
Home Page
ITP-5107S
Table of Contents
Содержание OfficeServ 7200
Страница 218: ...DS 5000 Home Page Table of Contents...
Страница 264: ...Home Page iDCS Keyset Table of Contents...
Страница 279: ...N O T E S Home Page Standard Guide Table of Contents...
Страница 302: ...Home Page System Admin Table of Contents...
