SAMSUNG
MMC PROGRAMS
COMBINED SYSTEMS PROGRAMMING MANUAL
FEBRUARY 2004
MMC 506 (Page 1 of 2)
MMC: 506
TONE CADENCE
FOR:
ALL
SYSTEMS
Purpose:
Sets and changes tone cadences on a system-wide basis
.
There are 14 tones
available, as listed below. Tones can be set to ‘interrupt’ or ‘continuous’, and interrupt
tone cadences can be customised. Some systems may require default settings to comply
with local operating companies.
FEATURE KEYS
DIAL 0
INTERRUPT TONE
DIAL 1
CONTINUOUS TONE
TONES
BUSY
Busy tone
CONFM/BARGE Confirm
tone and Barge-in tone
DIAL
Dial tone
DND/NO MORE
DND tone and No More Call key tone
ERROR
Error tone
HOLD/CAMPON
Hold tone and Camp-on tone
MSGWAT
Message waiting tone
RGBACK Ringback
tone
RING
Ring over page tone (to external page port)
TRSFER
Transfer dial tone
DID RNGBACK
AC15 ringback tone (not available on 408 systems)
CO BUSY
CO Busy tone
CO RINGBACK
CO Ringback tone
CO DIAL
CO Dial tone
ACTION
DISPLAY
1. Open programming and select
506
Display shows
BUSY TONE
INTERRUPT TONE
2. Press VOLUME keys to select tone (e.g.TRSFER)
and press RIGHT soft key
TRSFER TONE
INTERRUPT TONE
3. Dial 0 for INTERRUPT tone or 1 for CONTINUOUS
tone
OR
Press VOLUME keys to select and press RIGHT
soft key
4. If you selected INTERRUPT tone, dial in new
value(s) for interrupt times (must be four digits each
– sequence is on/off/on/off)
Press RIGHT soft key to advance cursor
Press LEFT soft key to retreat cursor
If entry is valid, system returns to step 2
TRSFER TONE: 0100
0100 0100 0100