SAMSUNG
MMC PROGRAMS
COMBINED SYSTEMS PROGRAMMING MANUAL
FEBRUARY 2004
MMC 300 (Page 1 of 2)
MMC: 300
CUSTOMER ON/OFF
PER STATION
FOR:
ALL
SYSTEMS
Purpose:
Allows the following features to be set on or off for all or individual stations.
(Some may not be available on your system.)
ACCESS DIAL
ON = user can select a trunk or trunk group by dialling its di-
rectory number (DN).
This selection should be turned OFF
when using LCR.
MICROPHONE
ON = keyset can be used in speakerphone mode.
OFFHOOK RING
ON = allows a short burst of ring tone to indicate another call.
SMDR PRINT
OFF = C.O. calls to and from the station will not print on
SMDR. This includes transferred calls or calls picked up from
hold or park.
TGR ADV.TONE
ON = a warning tone will be heard each time LCR advances to
the next route.
VMAA FORWARD
ON = calls can be forwarded to voice mail.
NGT PASSCODE
ON = requires passcode when invoking night service.
INTRCOM
SMDR
or
STN CALL PRT
OFF= the station will not print internal calls on SMDR.
FWD DLY USE
ON = calls will overflow to the Forward No Answer destination
when the Forward No Answer timer expires even when the
Forward No Answer feature is not activated at the called party
extension.
Set the Forward No Answer destination in
enable the feature. (Alternatively, use code
603 plus the station number, then code 600 to cancel the fea-
ture.)
FORWARD OVRD
ON = the station overrides the call forward feature set on a
called extension. (Used for operator positions.)
RECL TO OPER
Used for an operator’s extension and in conjunction with a CTI
operator’s console. If a transferred call from an extension is re-
turned as unanswered, it will return to the operator group and
not the extension transferring the call.
SLT PWR DISC
ON = SLI port receives real disconnect signal instead of busy
or error tone. (VMAA or DATA ports always receive real dis-
connect signal.)