background image

SAMSUNG 

 

   MMC PROGRAMS  

 

COMBINED SYSTEMS PROGRAMMING MANUAL 

 

     FEBRUARY 2004

 

MMC 308 (Page 1 of 2) 

MMC: 308    

ASSIGN BACKGROUND  

  

 

MUSIC 

SOURCE

 

FOR: 

    ALL 

SYSTEMS 

 

Purpose:  

Assigns a background music (BGM) source to keysets. 

 

DCS 

At least one Trunk A card must be installed. 19 music selections are possible, de-
pending on the number of Trunk A cards. One music source is provided per card. 
The default directory number of a BGM source is 3701–3719. (Internal music is 
always the odd numbered address, e.g. 3701, 3703.)

 

Compact II 

Two possible music selections, depending on whether a Misc card is installed. One 
music source is provided on the base board (switch select internal/external); the 
other external source is provided on the Misc card. The default directory number of 
a BGM source is 371–372. (Internal music is always address 371.)

 

816, 408 & 
408i 

There is a music source on the base board (switch select internal/external). The 
default directory number of a background music source is 371.   

i

DCS100 

Two possible music selections, depending on whether a Misc card is installed. One 
music source is provided on the base board (switch select internal/external); the 
other external source is provided on the Misc card. The default directory number of 
a BGM source is 371–372. 

i

DCS500 

 

 

Six possible music selections depending on the number of Misc daughterboards 
installed. The default directory number of a BGM source is 370x.

 

OS500 ‘S’ 
& ‘M’

 

Two possible music selections on the Misc daughterboard. The default directory 
number of a BGM source is 37x. 

OS500 ‘L’ 

Six possible music selections depending on the number of Misc daughterboards 
installed. The default directory number of a BGM source is 37x. 

 

Additionally, for any system, you may select an Auto Attendant (AA) port to provide continu-
ous play of a specific recording. The AA port selected must be the last port on the card. If 
selected, the BGM source will be the message defined in 

MMC 736

 from the port defined in 

this MMC. 

For example, if this MMC selects the music source for station 201 as 384 (the last port on 
the AA card) and MMC 736 selects message 20 for the AA card, extension 201 will hear 
message 20 from the installed AA card. 

If you have a Voice Mail System installed you may also select a VM recording as a music 
source. The recording must already been defined in 

MMC 756

 and will show up here as the 

VM port assigned with the recording. 

 
 
 
 
 
 
 
 
 

Содержание DCS



























































































































































































































































































































































































































Отзывы: