SAMSUNG
MMC PROGRAMS
COMBINED SYSTEMS PROGRAMMING MANUAL
FEBRUARY 2004
MMC 416 [
i
DCS/OS500] (Page 1 of 1)
MMC: 416
ASSIGN
E&M/DID RINGDOWN
FOR:
i
DCS100
i
DCS500
OS500
MMC 416 Assign AC15 Translation,
Purpose
: Defines which ring destination table an E&M or DID trunk will follow for incom-
ing calls. There are three options for each trunk:
0
FOLLOW INCOM DGT
When a trunk is set to this option calls will ring at the destination
that matches the digits received from the C.O. (Follows
1
FOLLOW DID TRANS
When a trunk is set to this option calls will ring at the destination
defined in
that matches the digits received from the
C.O.
2
FOLLOW TRK RING
Calls will ring at the destination defined in
trunk. If the destination defined in MMC 406 is a VMAA port or
group, the system will repeat the digits received from the C.O. to
the port when it answers.
If you select this option, press the right soft key and “NUM OF
DGT:” will appear in the display. Enter the number of incoming
digits from the C.O. (0–4).
ACTION
DISPLAY
1. Open programming and select
416
Display shows
[701] E&M TRANS
FOLLOW INCOM DGT
2. Enter desired trunk number (e.g., 705)
OR
Press VOLUME keys to make selection and press
RIGHT soft key to move cursor
OR
Select all trunks
[705] E&M TRANS
FOLLOW INCOM DGT
OR
[ALL] E&M TRANS
FOLLOW INCOM DGT
3. Dial 0–2 to select option (e.g. 1)
OR
Press VOLUME keys to make selection and press
RIGHT soft key
[705] E&M TRANS
FOLLOW DID TRANS
4. Press Transfer/TRSF to store and exit
OR
Press SPEAKER to store and advance to next
MMC
Default Data:
FOLLOW INCOM DGT
Related Items:
MMC 406 Trunk Ring Assignment
MMC 714 DDI Number and Name Translation