Saluki S3602 Series Скачать руководство пользователя

Страница: 287 / 312

Tel: 886.2.2175 2930 Email: [email protected]

www.salukitec.com

287

1871

Error

The channel number is beyond the range.

The specified channel number is beyond the allowed range.

1872

Error

The channel is not found.

An unknown channel is specified under the program control.

1873

Error

The proposed sweep segment is not found.

An unknown sweep segment is specified under the program control.

1874

Error

The sweep segment table is empty.

At least one segment should be defined in the segment table sweep mode. This error only occurs in remote control.

1875

Error

The number of sweep points of the active sweep segment table is 0.

At least one sweep point with segment should be set in the segment table sweep mode. This error only occurs in remote
control.

1876

Error

The specified source attenuation is invalid.

Try to set channel attenuation properties to the vector network analyzer with no source attenuator.

1877

Error

There are too many sweep points and the logarithmic sweep mode fails. Reduce the number of sweep points.

The maximum number of scanning points should be 401 in the logarithmic sweep mode.

1878

Error

The set point number is larger than the allowable number in the logarithmic sweep mode.

The maximum number of sweep points should be 401 in the logarithmic sweep mode.

2048

Error

Options should be added based on the standard analyzer so as to enable this function.

2049

Error

The current measurement instrument does not have the function you need.

2050

Error

A conflict occurs between the required function and current instrument state.

2051

Prompt

The file <x> has been saved.

2052

Error

File <x> saving fails.

2053

Error

File opening fails or the file <x> is not found.

2054

Error

The <x> head is wrong.

2055

Error

The state file is invalid and cannot loaded!

2056

Error

Put forward the request to enter the sleep mode.

2057

Error

Wake up from the sleep mode. The PBT_APMRESUMEAUTOMATIC message is received.

2058

Error

Wake up from the standby state. The PBT_APMRESUMESUSPEND message is received.

2059

Warning

Wake up from the standby state. The PBT_APMRESUMECRITICAL message is received.

2060

Warning

Wake up from the unknown sleep mode. The NOPBT_Message message is received in allocation and trial recovery.

2061

Error

The file <x> already exists. The file is overridden.

Only in remote application.

Содержание S3602 Series

























































































































































































































































































































Результаты поиска

Содержание S3602 Series

Отзывы:

Похожие инструкции для S3602 Series

Бренды по названию

Популярные бренды

Saluki S3602 Series, Руководство пользователя

Результаты поиска

Содержание S3602 Series

Отзывы:

Похожие инструкции для S3602 Series

Бренды по названию

Популярные бренды