Saadat ALBORZ B9, Руководство оператора

Страница: 15 / 302

Chapter 1: Introduction User Manual
1-11
Waveform / Menu Area
:
All waveforms can be displayed at the same time. The waveforms from top to bottom are: ECG,
SpO2, IBP1, IBP2, EEG and RESP/CO2/Multi-gas.
Gain, filter, lead and sweep of the ECG are displayed as well .The three dotted lines from top to
bottom show the highest scale, cursor and lowest scale of IBP waveform. These values can be
manually set.
All menus in monitor always appear at fixed areas on the screen. When a menu is displayed,
some waveforms become invisible. The menu with regard to its size will cover 2, 3, 4 or 5
waveforms.
Parameter Area
:
Numeric values of each parameter are displayed at a fixed position on the screen and with a color
corresponding to its waveform. The parameters values refresh every second, except that the
NIBP and CO values refresh each time the measurement is over.
Message Area:
Different messages are displayed based on alarm priority in this area. Background color changes
for different alarm levels (I, II and III).
Level I alarm message: Red background – Black text
Level II alarm message: Yellow background – Black text
Level III alarm message: Cyan background – Black text
If no alarm is triggered, the message will be displayed with gray background.
NOTE:
1- When using the monitor, the screen should be protected from direct sunlight in
order to get a clear view of what is displayed.
2- To make the monitor readable outdoor, transfer it to shade or a dark
environment.
3- If the monitor is used outdoor, place it in a location that is not exposed to direct
sunlight.
Alarm indicator:
In normal mode, the alarm indicator is not lit.
In alarm mode, the alarm indicator lights and flashes.