RST FRC-F Series, Руководство пользователя

Страница: 88 / 140

9.581.140-6
Page:
88
9.7.7.4.3 Adjustment of monitoring times for special cases
The default value of the monitoring time is 2000 msec. If this time is not sufficient in certain situations,
it can be increased to up to 4000 msec in the service menu.
If you press the "
E " and " C " buttons simultaneously, the service menu level will be enabled after one
second, and the following menu can be selected.
Set the travel operation start monitoring time, maximum value 4000 ms.
Set the travel operation end monitoring time, maximum value 4000 ms.
9.7.7.4.4 Resetting the fault
If a brake control error has occurred, it can not be acknowledged, so the drive remains locked. After
turning off and restarting the inverter checks whether an entry with brake monitoring error is stored in
the fault memory. If so, it will remain locked.
An unlock is possible only by deleting the error memory and then off and then start the inverter.
Extended
ServiceXC164
----------------------
○
ServiceXC164
Error resol.
----------------------
○
Error resol.
t BrOnEN81 2000 ms
----------------------
○
Fehlerausloesung
t BrOffEN81 2000 ms
----------------------
○