Rohde & Schwarz AREG100A, Руководство пользователя, Страница: 69 / 321

Using Power Sensors
R&S
®
AREG100A
69 User Manual 1178.7417.02 ─ 04
The "Overview" tab shows the list of detected sensors, and provides a separate tab
per sensor.
A sensor tab contains all parameters for configuring the sensor settings, like aver-
age or peak display, reference source, filter and level offset.
The remote commands required to define these settings are described in
Chap-
ter 9.14, "SENSe, READ, INITiate and SLISt Subsystems" , on page 250, including
the triggering of the measurement and the retrieval of measurement results.
Settings
Sensor type and serial number ..................................................................................... 70
Level (Peak) / Level (Average) .....................................................................................70
Sensor Mapping ............................................................................................................ 70
Sensor settings ............................................................................................................. 70
└ State ...............................................................................................................70
└ Zero ................................................................................................................70
└ Use Frequency Of ...........................................................................................70
└ Frequency ...................................................................................................... 71
└ Level Offset State,Level Offset ....................................................................... 71
└ Filter ................................................................................................................ 71
└ Filter Length .................................................................................................... 72
└ Noise/Signal Ratio .......................................................................................... 72
└ Auto Once .......................................................................................................72
└ Timeout ........................................................................................................... 72
└ Default Aperture Time .....................................................................................72
└ Aperture Time ................................................................................................. 72
└ S-Parameter ...................................................................................................73
└ Enable Logging ...............................................................................................73
NRP Power Viewer