manualshive.com logo in svg

Rohde & Schwarz AREG100A, Руководство пользователя, Страница: 276 / 321

Поделиться
Скачать
Rohde & Schwarz AREG100A Скачать руководство пользователя страница 276

Maintenance

R&S

®

AREG100A

276

User Manual 1178.7417.02 ─ 04

Remote command: 

:CALibration<hw>:ALL:TIME?

 

on page 194

Temperature Offset Since Last Full Adjustment

Displays the temperature difference, comparing the temperature at the beginning of the
last adjustment to the temperature at the beginning of the present adjustment.

Remote command: 

:CALibration<hw>:ALL:TEMP?

 

on page 193

Information

Displays information to the current adjustment state.

Remote command: 

:CALibration<hw>:ALL:INFormation?

 

on page 193

Continue Adjustment on Error

Continues the calibration even though an error was detected. By default adjustments
are aborted on error.

This function is password-protected. Unlock the protection level 1 to access it.

Remote command: 

:CALibration<hw>:CONTinueonerror

 

on page 194

10.3.4

 

FPGA/uC Update Settings

Access:

► Select "System Config > Setup > Maintenance > FPGA/µC Update".

This dialog enables you to check for and install internal assembly updates.

Performing Maintenance Tasks

Содержание AREG100A


































































































































































































































































































































Отзывы:

Нет отзывов