Radar Echo Generation
R&S
®
AREG100A
55
User Manual 1178.7417.02 ─ 04
The distance is the sum of the fixed delay according to the used option and the air
gap between DUT and AREG as configured in
on page 61.
If the user changes the airgap in the measurement setup, the measured distance
of the RUT will change accordingly, as the signal delay in the AREG will stay con-
stant. By adjusting the airgap setting in the AREG configuration to the true value,
the correct resulting distance will be displayed in the radar objects display and
EIRP and RCS calculations will be carried out correctly.
● ∑
Att:
This attenuation is the sum of the specific attenuation for each individual object as
configured in
on page 57 and the base attenuation affecting all
radar targets as configured in
Chapter 4.2.3.2, "Configure Base Attenuation"
on page 58. The reference planes for the signal attenuation are the RX wave-
guide input of the AREG and the TX waveguide output of the AREG.
●
Vel:
Displays the configured Doppler speed (see
●
RCS:
Displays the radar cross section. For details, see
To configure one or more radar objects, tap the "Radar Objects" tile. The "Radar
Objects" menu opens.
Figure 4-7: Radar Objects menu
4.2.3.1
Objects
In the "Objects" tab, all available radar objects and their configuration settings are dis-
played.
Object Settings
Access:
► Select "Radar Objects" > "Objects"
GUI Elements