Rohde & Schwarz AREG100A, Руководство пользователя, Страница: 91 / 321

File and Data Management
R&S
®
AREG100A
91 User Manual 1178.7417.02 ─ 04
6.7.1 Removing File System Protection
Before you try to access the file system via ftp, SMB (samba) or USB, fulfill the follow-
ing:
●
Disable write protection on the file system
●
Enable the corresponding service or interface
To enable write permission on the file system
1. Select "System Config > Setup > Security > Security > General"
2. Enable "Volatile Mode"
3. Enter the "Security Password".
The default password is 123456 . For more information, see Chapter 7.4, "Using the
Security Settings" , on page 113.
4. Select "System Config > Setup > Maintenance > Shut Down"
5. Select "Reboot".
The system reboots. The enabled settings are active.
To enable file transfer via ftp
1. Select "System Config > Setup > Security > Security > LAN Services".
2. Enable "LAN Interface"
3. Enable "FTP"
4. Enter the "Security Password".
The default password is 123456 . For more information, refer to Chapter 7.4, "Using
the Security Settings" , on page 113.
5. Select "Accept".
To enable file transfer via SMB (samba)
1. Select "System Config > Setup > Security > Security > LAN Services"
2. Enable "LAN Interface"
3. Enable "SMB (Samba)"
4. Enter the "Security Password".
The default password is 123456 . For more information, refer to Chapter 7.4, "Using
the Security Settings" , on page 113.
5. Select "Accept".
To enable file transfer via USB
1. Select "System Config > Setup > Security > Security > General"
2. Enable "USB Storage"
How to Transfer Files from and to the Instrument