Rohde & Schwarz AREG100A, Руководство пользователя, Страница: 78 / 321

File and Data Management
R&S
®
AREG100A
78 User Manual 1178.7417.02 ─ 04
Presetting the instrument to a user-defined instrument state
The reset functions set the parameters and operating modes to default values prede-
fined by the factory. Alternatively to these default settings, you can:
●
Define user-specific recall settings to be restored after a preset
(see
Chapter 6.2.3, "How to Recall User Settings Automatically after Preset" ,
on page 79)
●
Store and reload user-defined instrument states
(see
Chapter 6.4.2, "How to Save and Recall Instrument Settings" , on page 84)
Mark / Do not mark parameters changed from preset
To survey the current state of the settings concerning default values, the
R&S
AREG100A offers a feature that visually identifies deviations from the default val-
ues.
For more information, see Chapter 6.2.2, "How to Identify Parameters Which Are Not in
a Preset State" , on page 79.
6.2.1 Preset, Set to Default and Factory Preset Settings
Preset ............................................................................................................................78
Set To Default ................................................................................................................78
Preset this Parameter ................................................................................................... 78
Execute Factory Preset .................................................................................................78
Preset
Resets all parameters and switching states, and closes all opened dialogs.
Consider also the following possibilities:
●
You can define the settings that are restored when you preset the instrument
(see
Chapter 6.2.3, "How to Recall User Settings Automatically after Preset" ,
on page 79)
●
You can reset the instrument to the factory state
(see
"Execute Factory Preset" on page 78)
See also Table 6-1 that contains the key parameters that are reset by the correspond-
ing preset functions.
Remote command:
*RST
on page 189
Set To Default
Resets the associated settings of the corresponding dialog or tab.
Preset this Parameter
Restores the default value of a single parameter.
Execute Factory Preset
Resets the instrument to its factory settings.
Restoring the (Default) Instrument Configuration