Rohde & Schwarz AREG100A, Руководство пользователя, Страница: 119 / 321

General Instrument Functions
R&S
®
AREG100A
119 User Manual 1178.7417.02 ─ 04
Sanitize
Executes the erase procedure that sanitizes the internal memory.
If the instrument is subject to high security, and you have not enabled the volatile
mode, the internal flash memory holds user-data, i.e. id poses a security risk. The sani-
tizing function makes sure that no user information is stored on the instrument when it
leaves the secure environment.
To apply the change: enter the security password and confirm with "Accept". Otherwise
the change has no effect.
See also Chapter 7.4, "Using the Security Settings" , on page 113 for more information
on the security concept.
Remote command:
:SYSTem:SECurity:SANitize[:STATe]
on page 234
7.4.2.3 Manual Operation Security Settings
Access:
► Select "System Config > Setup > Security > Security > General > Manual Opera-
tion".
The "SW Update" tab enables you to lock front panel operation and/or reading the
display.
The remote commands available to control security settings are described in Chap-
ter 9.5, "DISPlay Subsystem" , on page 197, and the Chapter 9.10, "SYSTem Subsys-
tem" , on page 218.
Annotation Frequency
Enables the display of the currently used frequency in the status bar.
To apply the change: enter the security password and confirm with "Accept". Otherwise
the change has no effect.
Remote command:
:DISPlay:ANNotation:FREQuency
on page 199
Using the Security Settings