Rohde & Schwarz AREG100A, Руководство пользователя, Страница: 199 / 321

Remote Control Commands
R&S
®
AREG100A
199 User Manual 1178.7417.02 ─ 04
:DISPlay:BUTTon:BRIGhtness <ButtonBrightnes>
Sets the brightness of the [RF on/off] key.
Parameters:
<ButtonBrightnes> integer
Range:
1 to 20
*RST: n.a. (no preset. default: 14)
Example:
DISPlay:BUTTon:BRIGhtness 15
Manual operation: See "RF Hardkey" on page 104
:DISPlay:UPDate <Update>
Activates the refresh mode of the display.
Parameters:
<Update> 0 | 1 | OFF | ON
*RST:
n.a. (factory preset: 1)
Example: See Example "Activating screen saver mode and display
update" on page 197
Manual operation: See "Display Update is" on page 104
:DISPlay:ANNotation:AMPLitude <State>
Indicates asterisks instead of the level values in the status bar.
Parameters:
<State> 0 | 1 | OFF | ON
*RST:
n.a. (factory preset: 1)
Example: See Example "Activating screen saver mode and display
update" on page 197
Manual operation: See "Annotation Amplitude" on page 120
:DISPlay:ANNotation:FREQuency <State>
Indicates asterisks instead of the frequency values in the status bar.
Parameters:
<State> 0 | 1 | OFF | ON
*RST:
n.a. (factory preset: 1)
Example: See Example "Activating screen saver mode and display
update" on page 197
Manual operation: See "Annotation Frequency" on page 119
DISPlay Subsystem