manualshive.com logo in svg

Rohde & Schwarz AREG100A, Руководство пользователя, Страница: 272 / 321

Поделиться
Скачать
Rohde & Schwarz AREG100A Скачать руководство пользователя страница 272

Maintenance

R&S

®

AREG100A

272

User Manual 1178.7417.02 ─ 04

For Instructions on how to perform the tests and the expected results, see 

Chap-

ter 10.3.2.2, "How to Test the Front Panel"

, 

on page 272

In case of malfunctions:

Accessing the online help in the check front panel dialog or exiting via [Esc]

During the test, the actual functions of all keys are disabled, including the [Help] and
the [Esc] keys.

10.3.2.1

 

Check Front Panel Settings

Access:

► Select "System Config > Setup > Maintenance > Check Front Panel".

Reflecting the front panel, the "Check Front Panel" dialog contains all functions to
test the operating elements of the instrument.

10.3.2.2

 

How to Test the Front Panel

How to perform the key panel test

To perform the key panel test, you operate the keys at the front panel, and check the
response of the instrument in the "Check Front Panel" dialog. To perform this test prop-
erly, check each key of the front panel. The test is only completed, when you have veri-
fied all keys.

During the test, the actual functions of the keys are disabled.

Performing Maintenance Tasks

Содержание AREG100A


































































































































































































































































































































Отзывы:

Нет отзывов