Safety reliably produced.
© RLS Wacon analytics GmbH ∙ +49 (0)5121 28126 0 ∙
Subject to
change without notice
47
Operation and handling
Start analysis
•
Press the START button to start the first analysis.
•
An analysis starts with rinsing the measuring chamber.
LED indicators
By means of the 4 LEDs, the LIMES analyser displays information on the operating status and
results of the measurements and provides information on the level of the reagent.
The unit status is indicated by 4 LEDs on the front of the unit.
The following indicators can be displayed during operation depending on the configuration. The
display variants of the blue LED (reagent notes) can occur in combination with the other LEDs
depending on the fill level of the reagent bottle.
Illustration 19: LIMES LED display front / operating front
The LED display shows the operating status:
LED
Colour
Information
A
Green (two-colour LED)
Limit value undershot
A
Red (two-colour LED)
Limit value exceeded
B
Yellow
Analysis active
B
Yellow flashing
Input contact open, e.g., by flow monitor
C
Blue
Provide reagent
C
Flashing blue
BoB message
D
Red
Device fault
Содержание 32-074165
Страница 76: ......