Riken Keiki GD-3EC, Техническое руководство

Страница: 67 / 177

4. Installation 4-7 Connecting the power and signal cables
67 / 168
9 Clamp the shield wire.
Use the single M3 screw to clamp the cable
shielding.
10 Return the display unit to its original position and
secure with the two M3 screws.
Take care not to trap the cable here.
11 Rotate the cover clockwise to attach and secure with the
single M4 hex socket set screw.
Use a hex key wrench (2 across flats) to tighten the M4 hex
socket set screw.
Take care not to trap the cable when attaching the cover.
Rotate the cover clockwise until it moves no further to
securely fasten in place.
Screw (M3)
Clamp
Shielding